Piping Engineer in Sharjah, United Arab Emirates

Scope of Responsibilities
Operate as part of a team of engineers and designers in carrying out detailed engineering work; assume responsibility for conceptual and detailed design (Concept, Front End or Basic, Material, Stress Analysis, Layout Engineering, Coordination of 3D modelling) and provide necessary technical information for procurement in compliance with tender specifications/data sheets and within work budgeted man-hour and project schedules.
Although not directly involved for issuing deliverables in optimum work share environment, job expectation is to work in collaboration with VEC to have full control on project in terms of integrity, schedule and budget keeping close monitor on VEC productivity. Primary Duties
- Review contract documents and identify requirements and scope of work for project execution. Review specifications, drawings and other documents as per project work share agreement with VEC. Establish contract review criteria, identify and resolve discrepancies and divergences from original proposal through the instigation of technical queries to Projects/Client.
- Main focus is to work in collaboration with VEC to maintain a stronghold of the project goals (Ensuring integrity & safety of the design, meeting quality as per contractual intent, meeting schedule, optimizing procurement & construction cost and maintaining high productivity) when executed by VEC as per optimum work share environment.
- Implementation of applicable Lesson Learnt throughout the project cycle.
- Successful implementation of agreed Value Engineering points.
- To drive right behaviour in VEC team to ensure all round performance and delivery.
- Work collectively with VEC to promote fit for purpose design philosophy.
- Greater flexibility in mobility.
- Work clearly as per the interface between Head Office & VEC adhering to SLA.
- Control, coordinate change using change control procedure.
- Escalate serious risk to senior management & always have a fall back plan that allows time to react.
- Operate & facilitate VEC team to promote “First Time Right” policy.
- To focus on piping bulk delivery and piping prefabrication activity.
- To focus along with VEC on design development to meet or beat the proposal estimation.
- Focus on engineering support for Piping deliverables, requirements of Painting, Coating & Fireproofing.
- Identify & expedite vendor documents that will impact project schedule.
- Review Model at own desk regularly & ensure proper Model Review preparation w.r.t. Model Review preparation control sheet & checklist prepared by VEC.
- Facilitate prompt response to Site query.
- To focus on piping bulk delivery and piping prefabrication activity.
- Ensure proper data input to Suppliers in right time.
- Identify critical engineering parameters and establish deliverables e.g. specifications, datasheets, layout drawings, stress analysis, isometrics, bill of materials and other applicable deliverables.
- Participate in the planning of man-hours, resources and organize the preparation of the Technical Document Register (TDR).
- Prepare conceptual/study layouts and designs and provide necessary inputs for modelling and drafting.
- Obtain the required inputs from other engineering disciplines e.g. mechanical data sheets, foundation and structure details, instrument specifications and other necessary data.
- Perform calculations for pipe wall thickness, reinforcement pads and others as per the relevant piping codes and standards.
- Stress analyse piping systems through the use of Caesar II software and prepare stress analysis reports, incorporating contract specifications and international codes, update isometric sheets as required. Identify stress factors and layout feasibility, resolve design irregularities. Provide piping loads to Civil Discipline, coordinate on technical issues as required.
- Perform and coordinate Material Take-off (MTO) activities and provide necessary details for further procurement activities.
- Participate in the set-up of the Material Management system (VPRM) incorporating the project specifications. Coordinate and incorporate the MTO from the 3D model. Update and maintain the system to incorporate the latest material requirements.
- Prepare and issue engineering drawings and technical documents for Inter-disciplinary Design Checks (IDC’s). Review and integrate comments and inputs of other engineering discipline into the relevant documents.
- Prepare and issue Inquiry Requisitions to vendors. Perform Technical Bid Evaluations (TBE). Review vendor drawings, documents and design calculations. Ensure vendor equipment specifications meet with client equipment specifications and within budgeted costs.
- Prepare and issue Purchase Requisitions for the procurement of equipment and materials. Coordinate with Procurement and provide necessary assistance to Expediting and Quality Departments.
- Participate in the preparation of all necessary documents up to the final IFC (Issued for Construction) stage, e.g. plot plans, piping plans, isometrics, locations plans, pipe support standards, material specifications and other relevant drawings and specifications.
- Participate in the set-up of the 3D CAD system (PDS/PDMS) incorporating the project specifications. Customize the system to deliver the model, drawings and data as per the project requirements. Attend to the day to day modelling problems of designers.
- Meet with vendor representatives, inspect vendor works and workshops and provide assistance to Quality Department as required.
- Interface and provide clarifications, guidance and technical support to Construction and Commissioning teams as required.
- Participate in the preparation of the final “As Built” 3D model, layouts and other documents.
- Perform related duties as and when directed by the direct supervisor. Job/Cost Impact
Responsible for the detailed technical work, coordinates between Discipline engineers and designers, acts as interface with other disciplines and Procurement. Cost/delivery impact situations are reviewed by supervisors. Work Contacts
Engineering Discipline Supervisors - When Required
Other Discipline Engineers - Frequently
Project Managers - When Required
Project Control - When Required
Procurement and expediting - When Required
Client Representatives - When Required
Vendor Representatives - When Required
Commissioning Personnel - When Required
Construction Personnel - When Required
Subcontractor Representatives - When Required Minimum Job Requirement
Bachelor Degree in Mechanical Engineering with a minimum of 8 years related oil & gas/petrochemical experience preferable from a background in working for EPC/consultancy organizations.

JOB SEARCH

Keywords / job title / skill / company

Type any location in the box above, or select below :
Africa
Asia & Pacific
CIS
Europe
Middle East
North America
South America
Afghanistan
Åland Islands
Albania
Algeria
American Samoa
Andorra
Angola
Anguilla
Antarctica
Antigua and Barbuda
Argentina
Armenia
Aruba
Australia
Austria
Azerbaijan
Bahamas, The
Bahrain
Bangladesh
Barbados
Belarus
Belgium
Belize
Benin
Bermuda
Bhutan
Bolivia
Bonaire, Sint Eustatius and Saba
Bosnia and Herzegovina
Botswana
Bouvet Island
Brazil
British Indian Ocean Territory
British Virgin Islands
Brunei
Bulgaria
Burkina Faso
Burundi
Cambodia
Cameroon
Canada
Cape Verde
Cayman Islands
Central African Republic
Chad
Chile
China
Christmas Island
Cocos (Keeling) Islands
Colombia
Comoros
Congo, Democratic Republic of the
Congo, Republic of the
Cook Islands
Costa Rica
Cote d'Ivoire
Croatia
Curaçao
Cyprus
Czech Republic
Denmark
Djibouti
Dominica
Dominican Republic
East Timor
Ecuador
Egypt
El Salvador
Equatorial Guinea
Eritrea
Estonia
Ethiopia
Falkland Islands (Islas Malvinas)
Faroe Islands
Fiji
Finland
France
French Guiana
French Polynesia
French Southern and Antarctic Lands
Gabon
Gambia, The
Georgia
Germany
Ghana
Gibraltar
Greece
Greenland
Grenada
Guadeloupe
Guam
Guatemala
Guernsey
Guinea
Guinea-Bissau
Guyana
Haiti
Heard Island and McDonald Islands
Holy See (Vatican City)
Honduras
Hong Kong
Hungary
Iceland
India
Indonesia
Iraq
Ireland
Isle of Man
Israel
Italy
Jamaica
Japan
Jersey
Jordan
Kazakhstan
Kenya
Kiribati
Korea, South
Kosovo
Kuwait
Kyrgyzstan
Laos
Latvia
Lebanon
Lesotho
Liberia
Libyan Arab
Liechtenstein
Lithuania
Luxembourg
Macau
Madagascar
Malawi
Malaysia
Maldives
Mali
Malta
Marshall Islands
Martinique
Mauritania
Mauritius
Mayotte
Mexico
Micronesia, Federated States of
Moldova, Republic of
Monaco
Mongolia
Montenegro
Montserrat
Morocco
Mozambique
Myanmar
Namibia
Nauru
Nepal
Netherlands
Netherlands Antilles
New Caledonia
New Zealand
Nicaragua
Niger
Nigeria
Niue
Norfolk Island
Northern Mariana Islands
Norway
Oman
Pakistan
Palau
Palestinian territories
Panama
Papua New Guinea
Paraguay
Peru
Philippines
Pitcairn Islands
Poland
Portugal
Puerto Rico
Qatar
Reunion
Romania
Russia
Rwanda
Saint Barthélemy
Saint Helena
Saint Kitts and Nevis
Saint Lucia
Saint Martin
Saint Pierre and Miquelon
Saint Vincent and the Grenadines
Samoa
San Marino
Sao Tome and Principe
Saudi Arabia
Senegal
Serbia
Seychelles
Sierra Leone
Singapore
Sint Maarten
Slovakia
Slovenia
Solomon Islands
Somalia
South Africa
South Georgia and the Islands
South Sudan
Spain
Sri Lanka
Suriname
Svalbard
Swaziland
Sweden
Switzerland
Taiwan
Tajikistan
Tanzania, United Republic of
Thailand
The Former Yugoslav Republic of Macedonia
Togo
Tokelau
Tonga
Trinidad and Tobago
Tunisia
Turkey
Turkmenistan
Turks and Caicos Islands
Tuvalu
Uganda
United Arab Emirates
United Kingdom
United States
United States Minor Outlying Islands
Uruguay
Uzbekistan
Vanuatu
Venezuela
Vietnam
Virgin Islands (US)
Wallis and Futuna
Western Sahara
Yemen
Zambia
Zimbabwe

Country, town, city or postcode

--Web2New--