ONLY CANDIDATES WITH EXPERIENCE WORKING FOR A MAJOR OIL AND GAS OPERATOR WILL BE CONTACTED.

A major Oil and Gas company is Seeking A Completions and Well Site Engineer to be based in Atyrau to start immediately. The closing date for this position is 19 March 2010.

JOB DESCRIPTION

Procedures

· Review procedures and provide feedback to Engineering

Risk Assessment

· Review risk assessments and ensure mitigators/action items are in place/addressed

Reporting Line

· The Well Test Engineer will report to the Company Completions Engineer or (during offshore operations) the Rig Supervisor

PRE-JOB (based in Atyrau)

· Directly supervise service companies in preparation and execution of completions and/or well test activities.

· Ensure all equipment is available when needed and is fit-for-purpose.

· Ensure all personnel are available when needed.

· Review all procedures with service company personnel before start of job.

· Review and confirm with all respective contractor supervisors the operating parameters of all equipment.

· Act as a liaison between the Drilling and all service companies.

ON-SITE (based on rig)

Mechanical Completion

· Installation of mechanical completion

· Ensure all required equipment on-board

· Assist preparation of tubing tally and space out calculations

· Witness/verify positive and inflow testing of 7 top of liner

· Ensure wellbore cleanliness and submit graphical presentation of NTU vs. circulation

· Witness proper make-up and pick-up of production packer assembly.

· Ensure proper setting of production packer.

· Witness proper TR-SCSSV make-up and pick-up

· Witness proper tubing hanger and landing joint make-up

· Witness/verify tubing hanger landing

· Witness/verify tubing test

· Witness/verify TR-SCSSV inflow test

· Ensure proper control line termination

· Inspect tubing hanger neck

· Prepare wellbore schematic

· Remedial operations such as plug backs, squeezes, etc.

Cased Hole Logging

· Rig-up/rig-down and safe operating procedures

· Confirm toolstring configuration

Perforating

· Execution of perforation job; log correlation, confirmation of shots fired, etc.

· Ensure base log is correlated against cased hole correlation log

· Ensure guns loaded in proper order

· Ensure sufficient inventory of guns and charges

· Verify e-line tool string and BHA including back-up

· Ensure proper hook-up of control panel to shear ram/wireline rams/grease injector/grease nipple on BOP

· Ensure proper pressure testing

· Verify grease inventory

· Verify gun correlation

Clean-up

· Rig-up, pressure test/integrity and supervision

· Ensure proper rig-up; no leaks on surface lines

· Ensure clean-up criteria is met

Stimulation

· Rig-up/rig-down and mechanical integrity of stim pumps, CTU, lines, etc.

· Witness proper rig-up/testing of stimulation lines

· Verify proper integrity of surface lines after rigging down stimulation lines

· Ensure proper operation of stimulation equipment (pump availability, metering accuracy, etc)

· Adhere to pressure limits specified in the procedure. Get approval for any changes to pressure limits from the Completion Engineer.

· Annular pressure limits will not be changed without a comprehensive review with the Completions Engineer.

· Running or application of mechanical isolation

· Ensure required plug, toolstring, BHA and wireline unit readiness

· Review on-site procedure

· Witness/verify rig-up and pressure testing

· Witness/verify plug setting and unlatching of running tool

Well Testing and DSTs

· Rig-up/rig-down and mechanical integrity of well test equipment, lines, etc.

· Ensure well test equipment rigged-up per P&ID

· Agree final DST tool string configuration (rupture disc settings, IRDV programming, etc)

· Verify separator functions

· DST Daily Activity report

· Confirm all wireline tool string configurations for adequate weight to get in the hole and prevent birdnesting.

Reporting

· Start preparing and collecting information required for the Completions Final Well Report

· Completion Time Analysis

· Obtain required service company reports

POST JOB REPORT AND ANALYSIS

Reporting

· Prepare initial Well Handover documentation for Operations

· Prepare Completions Final Well Report

· Completion and Test Summary

· Completion Procedures

· Mechanical Equipment Installation

· Perforating, Clean Up, Stimulating & Testing

· Completion Time, Cost Summary, Major NPT Summary

· Operational Problems & Recommendations

· Detailed Daily Completion Reports

· 7 Liner

· 9-5/8 / 7 Packers & Tieback Equipment

· TR-SCSSV

· Wellhead and Christmas Tree

· Torque Turn Plots

· Slickline Reports

· Tubing Tally, Liner Tally, Spaceout Calculations, Deviation Survey

· Cased Hole Log Summary & Cover Sheet

· Perforation Depth Correlation Log Cover Sheet

· Stimulation Report

· Daily Testing Reports

· Perforation Reports

· Electronic documentation of rig & mechanical operations

· Service/Equipment Deficiency Report

· Daily Flaring Report

· Lessons Learned

· Pictures of rig-ups, operations, layouts, etc. as required

· Time Breakdown Analysis

· Copy of Drillers Instructions